subaru Workshop Repair Guides

Subaru Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 10
background image

10. Install the starter seal.

11. Install the magnet switch assembly to the starter housing, and tighten the nuts.

NOTE:  Apply grease to the installation part of the shift lever.

Grease: DENSO HL50

Tightening torque: 7.5 N.m (0.8 kgf.m, 5.5 ft.lb)

12. Install the harness to the terminal M (A) of the magnet switch assembly, and tighten the nut.

Tightening torque: 10 N.m (1.0 kgf.m, 7.4 ft.lb)

Starting and Charging > Starting System > Starter Motor > Component Information > Service and Repair > Removal and Replacement > Page 4421

< PREV PAGE NEXT PAGE >