SVX LSi AWD L6-3.3L DOHC (1997)
Power Steering Pump: Service and Repair
Replacement
REMOVAL
1. Disconnect battery earth (-) terminal
2. Remove belt cover.
3. Loosen nuts which secure idler pulley.
4. Loosen slider bolt, and remove V-belt.
5. Remove nut from front end of oil pump pulley, and detach oil pump pulley.
6. Disconnect oil pump switch harness connector.
7. Drain approximately 0.3 liters (0.3 US qt.) of fluid from oil reservoir tank.
8. Disconnect hose from oil reservoir tank.
CAUTION: Be careful not to spill fluid from hose end to V-belt. Cover open ends of hose and pipe with a clean cloth to prevent entry of foreign
matter.