SVX LSi AWD L6-3.3L DOHC (1997)
9. Disconnect Pressure pine from pump.
10. Remove bolts securing oil pump & tank to bracket, and then remove pump and tank.
11. Place pump in a vise, and remove bolts from upper surface of tank.
CAUTION: Use soft jaws and lightly tighten vise jaws. After bolts are loose enough to be rotated with your hand, press pump against tank while
removing bolts. Failure to do so causes fluid to spill out. Remove tank as quickly as possible, and wipe clean fluid spilled on parts. Except when
only tank is to be checked, remove tank and pump as a unit and separate from each other on a work bench. This prevents fluid from spilling on the
engine.
INSTALLATION
To install, reverse the order of removal procedures. Replenish specified fluid and purge air. Do not operate engine before replenishing fluid as this
will seize oil pump.