SVX LSi AWD L6-3.3L DOHC (1997)
b. To ease removal of gearbox, turn gearbox assy around so that control valve faces rear.
c. Move gearbox assy fully to the right so that left tie-rod end can be removed from subframe.
d. Remove gearbox assy from vehicle.
INSTALLATION
Installation is in the reverse order of removal. Observe the following:
a. If center airbag system roll connector becomes misaligned by accidental rotation of steering wheel, realign connector.
b. When adjusting toe-in, hold boot as shown to prevent it from being rotated or twisted. If twisted, straighten it.
Vehicle Speed Sensing, Electronic, Hydraulic Reaction Type
REMOVAL
1. Disconnect battery earth (-) terminal.
2. Disconnect both O2 sensor and steering harness connector. (only for electronically controlled type)
3. Raise vehicle with a jack and remove front wheels.