SVX LSi AWD L6-3.3L DOHC (1997)
4. Remove front under cover.
5. Disconnect O2 sensor harness from clip.
6. Remove collector cover and rear catalytic converter protector.
7. Disconnect front exhaust pipe. Refer to Exhaust System.
8. Using a puller, remove tie-rod end from knuckle arm after pulling off cotter pin and removing castle nut.
9. Remove spring pin which secures transmission spindle to Free ring Tripod Joint (FTJ). Discard old spring pin. Replace with a new one.
10. Remove FTJ from transmission spindle and free from transmission.
11. Disconnect the pipe joint from upper hose and drain fluid rotating steering wheel to the right and left. Similarly, loosen flare nut securing other
pipe and disconnect the pipe and drain fluid from the pipe.