subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Relays and Modules - Steering and Suspension > < Wheel Alignment|Page 2862
Page 2
background image

4.

On Impreza, Legacy & SVX models, take wheel arch height measurements as shown in Fig. 11.

5.

On all models, refer to Steering and Suspension/Suspension/Specifications. If clearances are not as specified proceed as follows:
a. On conventional suspension, replace the respective coil springs.
b. On pneumatic suspensions, check for leaking air line or tank fittings, leaking or defective solenoid valves, defective control unit or height

sensors. Repair as needed.

Relays and Modules - Steering and Suspension > < Wheel Alignment|Page 2862