Drive Belt: Testing and Inspection
- Make
- Suzuki
- Model
- Equator 2WD
- Engine
- V6-4.0L
- Year
- 2009
- Section
- Drive Belt › Testing and Inspection
MaintenanceTesting and Inspection · page 1 of 2
Drive Belt: Testing and Inspection
Checking Drive Belts [VQ40DE]
WARNING: Be sure to perform when the engine is stopped.
1. Remove air duct and resonator assembly when inspecting drive belt.
2. Make sure that the auto tensioner indicator is within the allowable working range (A) as shown.
3. Visually check entire belt for wear, damage or cracks.
4. If the indicator is out of allowable working range or drive belt is damaged, replace the drive belt.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2009 Suzuki Equator 4.0L
- PARTOil filterSearch: Suzuki Equator 2009 4.0L oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Suzuki Equator engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.