Grand Vitara 2WD V6-2.7L (2006)
Alternator: Service and Repair
Disassembly and Assembly
Generator Disassembly and Assembly
Reference: Generator Dismounting and Remounting
Reference: Generator Components Disassembly
1. Put match marks at 2 locations A. Front housing (1) and Stator (2) and B. Rear housing (3) and Stator (2), as shown in figure so that any possible
mistake can be avoided.
2. Loosen frame bolt (1).
3. Remove front housing with rotor (1) from stator (2).
4. Hold rotor by using vise (2) and loosen pulley nut and then remove pulley (1).
CAUTION:
When using vise, put clean cloth (3) and aluminium plate (5) between rotor (4) and vise (2) so as not to cause damage to rotor.
