Kizashi AWD L4-2.4L (2010)
CAUTION:
Be sure to use new drive shaft nut.
Tightening torque
Drive shaft nut* (a): 250 Nm (25.5 kg-m, 184.5 lbf-ft)
^
Caulk drive shaft nut (1) as shown.
CAUTION:
Be sure not to crack caulking part (2) of drive shaft nut while caulking it. Replace it with new one if it is cracked.
^
Install front wheel.
^
Tighten exhaust pipe No.1 bolts and nuts to specified torque.
^
Fill transaxle with oil as specified:
-
6M/T model:
-
CVT model:
^
Check front wheel Alignment.