Grille: Service and Repair
- Make
- Suzuki
- Model
- Verona
- Engine
- L6-2.5L
- Year
- 2005
- Section
- Grille › Service and Repair
Body and FrameService and Repair
Grille: Service and Repair
Radiator Grille Removal and Installation
Radiator Grille Removal
1. Open the hood.
2. Remove the nuts and the radiator grille.
Radiator Grille Installation
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the radiator grille with the nuts.
Tighten:
Tighten the radiator grille nuts to 4 N.m (35 lb.in).
2. Close the hood.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2005 Suzuki Verona 2.5L
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Suzuki touch up paint
- PARTPanel clip assortmentSearch: Suzuki panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.