XL-7 2WD V6-3.6L (2007)
Fluid Line/Hose: Service and Repair
Fluid Cooler Pipe Seal Replacement
Fluid Cooler Pipe Seal Replacement
Special Tool
J 41239-1A Cooler Line Seal Installer
J 45201 Cooler Line Seal Remover
Removal Procedure
1. Raise Vehicle.
WARNING:
Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide
additional support for the vehicle on the opposite end from which the components are being removed.
2. Place a drain pan or suitable container under the vehicle.
3. Remove the transaxle oil cooler line assembly nut from the transaxle.
4. Disconnect the transaxle oil cooler lines from the vehicle.
