4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
3. Remove 3 solenoids.
4. Turn over assembly and remove 25 bolts.
5. Lift off upper valve body and plate as a single unit.
Hold the valve body plate to the upper valve body.
HINT: Be careful that the check balls and strainer do not fall out.
VALVE BODY ASSEMBLY
1. Position new No.1 gasket on upper valve body.
Align a new No.1 gasket at each bolt hole.
2. Position valve body plate on No.1 gasket.
Align the plate at each bolt hole.