4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
3. Position new No.2 gasket on plate.
Align a new No.2 gasket at each bolt hole.
4. Place upper valve body with plate and gaskets on top of lower valve body.
Align each bolt hole and gasket in the valve body.
5. Install 25 bolts to upper valve body.
HINT: Each bolt length is indicated in the illustration.
Torque: 6.4 N.m (56 inch lbs.)
6. Install 3 solenoids.
7. Install manual valve.
8. Install detent spring.
