4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
![background image](/toyota/4_runner_2wd/l4-2693cc_2.7l_dohc_mfi/Page-1532023.png)
a. Using the 09950-00020 SST and a press, remove the dust deflector.
b. Using the 09636 - 20010 SST and a press, install a new dust deflector.
2. Replace the intermediate shaft No.2, if necessary by performing the following functions.
a. If the vehicle came w/ Automatic Differential Dissengagement (ADD), remove the clutch hub, doing the following.
1. Using a snap ring expander, remove the snap ring.
2. Remove the clutch hub from the intermediate shaft No.2.
b. Remove the oil seal by using the 09308-00010 Special Service Tool (SST), remove the oil seal from the differential tube.
c. Remove the intermediate shaft No.2
1. Using needle nose pliers, remove the snap ring.
2. Remove the shaft from the differential tube.
d. Remove the intermediate shaft No.2 bearing.
1. Using a snap ring expander, remove the snap ring.