4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
Electronic Brake Control Module: Service and Repair
SKID CONTROL ECU ASSY
REPLACEMENT
1. REMOVE INSTRUMENT PANEL FINISH PLATE
2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER
3. REMOVE INSTRUMENT PANEL LOWER LH
4. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSY
a. Remove the bolt and 2 nuts, then move the instrument panel junction block assy aside.
5. REMOVE SKID CONTROL ECU ASSY
a. Disconnect the 4 skid control ECU connectors.
b. Remove the 2 nuts and control ECU assy.
c. Disconnect the skid control buzzer connector and remove the skid control buzzer assy from skid control ECU assy.