Avalon V6-3.0L (1MZ-FE) (1996)
Rear Door: Service and Repair
DISASSEMBLY
1. REMOVE INSIDE HANDLE BEZEL
2. REMOVE ASH TRAY
3. REMOVE POWER WINDOW SWITCH
4. REMOVE DOOR TRIM
a. Using a screwdriver, remove the 2 caps.
HINT: Tape the screwdriver tip before use.
b. Remove the 4 screws and 2 clips.
c. Insert a screwdriver between the door and door trim to pry the trim out.
NOTE: Be careful not to damage the door and door trim.
HINT: Tape the screwdriver tip before use.
d. Pull the trim upward to remove it.
e. Remove the 7 screws and armrest from the door trim.
f.
Remove the 5 screws and speaker cover from the door trim.
5. REMOVE DOOR INSIDE HANDLE
a. Remove the 2 bolts.
b. Disconnect the 2 control links from the door inside handle as shown in the illustration.