Avalon V6-3.0L (1MZ-FE) (1996)
6. REMOVE REAR DOOR SERVICE HOLE COVER
HINT: At the time of reassembly, please refer to the following item.
Bring out the links through the service hole cover.
7. REMOVE DOOR MOULDINGS
a. Pry out the clips from the rear door belt moulding edge and remove the moulding.
b. Remove the 3 screws and rear door front frame moulding.
c. Remove the 3 screws and rear door rear frame moulding.
d. Remove the 4 screws and rear door upper moulding.
8. REMOVE DOOR SPEAKER BOARD
9. REMOVE REAR DOOR GLASS RUN
HINT: Pull the glass run upward.
10. REMOVE REAR DOOR WEATHERSTRIP N0.2
11. REMOVE REAR DOOR WEATHERSTRIP
12. REMOVE OUTSIDE LOWER MOULDING
13. REMOVE DOOR GLASS
Remove the 2 bolts and glass.
HINT: At the time of reassembly, please refer to the following items.
-
Adjust the glass and tighten the bolt when dimensions A and B, as shown, are equal.
-
Substitute the bolt with washer for the centering bolt.