Avalon V6-3.5L (2GR-FE) (2006)
4. INSTALL TERMINAL TO CONNECTOR
a. Insert the terminal.
HINT:
1. Make sure the terminal is positioned correctly.
2. Insert the terminal until the locking lug locks firmly.
3. Insert the terminal with terminal retainer in the temporary lock position.
b. Push the secondary locking device or terminal retainer in to the full lock position.
5. CONNECT CONNECTOR
Disconnection of Male and Female Connectors
DISCONNECTION OF MALE AND FEMALE CONNECTORS
To pull apart the connectors, pull on the connector itself, not the wire harness.
HINT: Check to see what kind of connector you are disconnecting before pulling apart.