Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
![background image](/toyota/camry/l4-2.4l_(2az-fxe)_hybrid/Page-1047002.png)
From 03-2006 to 10-2006
P311 HYBRID VEHICLE CONTROL: INVERTER WITH CONVERTER: REMOVAL
REMOVAL
1. PRECAUTION
2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/HV
Battery/Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
4. REMOVE SERVICE PLUG GRIP See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/HV Battery/Removal
5. REMOVE AIR CLEANER INLET ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Removal
6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Removal