toyota Workshop Repair Guides

Toyota Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 8
background image

12. Remove rear bearing retainer. 

-

Using a torx wrench (T45), remove the 7 torx screws and rear bearing retainer.

13. Remove shim.
14. Remove transmission case.

a. Remove the 17 bolts.
b. Using a plastic hammer, tap the transmission case.

15. Remove output shaft assembly.
16. Remove differential case assembly.

Transmission and Drivetrain > Manual Transmission/Transaxle > Differential, Manual Transaxle > Component Information > Service and Repair > Page 5125

< PREV PAGE NEXT PAGE >