Camry Sedan L4-2.0L (3S-FE) (1987)
NOTE:
The enclosed special service campaign dealer owner list (SSC H04) indicates each customer's name and address and a list of the vehicles
that are involved in this campaign in your area. You may also utilize this valuable list for your future followup system.
3.
Repair Procedures
Refer to the attached Technical Instructions.
4.
Parts Ordering
As with all campaigns, necessary parts must be ordered from your facing Parts Distribution Center.
In order to avoid excessive parts orders and maintain adequate parts inventory, it is highly recommended that your initial parts order does not
exceed 10% of the number of vehicles indicated on the enclosed special service campaign dealer owner list (SSC H04).
Kit Part Number
Kit Part Name
Quantity
04007-02132
*Protector kit, back door
1 per vehicle
*Protector Kit contains:
Protector, Back Door Garnish Molding (Guard Tape) RH - 1
Protector, Back Door Garnish Molding (Guard Tape) LH - 1
Protector, Back Door Panel Sub-Assy (Edge Protector) - 1
Clip, Back Door Panel Sub-Assy - 9
Protector, Back Door Lower (Stopper Strips) - 3
5.
Reimbursement Procedures
Submit special service campaign claims using the following operation codes:
*The above operation codes include 0.1 hour for administrative expenses.
Please review this entire package with your staff to familiarize them with the proper step-by-step procedure and implement this service campaign to
ensure customer satisfaction.
Camry Wagon Back Door Parts & Tools
CAMRY BACK DOOR MODIFICATION PROCEDURE