Camry Sedan L4-2.0L (3S-FE) (1987)
/Page-297002.png)
11. REMOVE NO.2 TIMING BELT COVER
Remove the five bolts, belt cover and gaskets.
12. SET NO.1 CYLINDER TO TDC/COMPRESSION
(a) Turn the crankshaft pulley and align its groove with the timing mark "0" of the No.1 timing belt cover.
(b) Check that the hole of the camshaft timing pulley is aligned with the alignment mark of the bearing cap.
If not, turn the crankshaft one revolution (360°).
13. REMOVE TIMING BELT FROM CAMSHAFT TIMING PULLEY
NOTE: If reusing the timing belt, place the match marks on the timing belt and camshaft timing pulley.
