Camry Sedan L4-2.0L (3S-FE) (1987)
Timing Belt: Service and Repair
Timing Belt Removal
REMOVAL OF TIMING BELT
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY
2. REMOVE RH FRONT WHEEL
3. REMOVE ENGINE RH UNDER COVER
4. REMOVE CRUISE CONTROL ACTUATOR
5. REMOVE DRIVE BELTS
6. REMOVE ALTERNATOR
7. REMOVE ALTERNATOR BRACKET
8. SLIGHTLY JACK UP ENGINE
Raise the engine enough to remove the weight from the engine mounting on the right side.
9. REMOVE ENGINE RH MOUNTING INSULATOR AND BRACKET
(a) Remove the through bolt, two nuts and mounting insulator.
(b) Remove the three bolts and bracket.
10. REMOVE SPARK PLUGS