Camry Sedan L4-2.0L (3S-FE) (1987)
/Page-296002.png)
(d) If there is wear or damage on only one side of the belt, check the belt guide and the alignment of the each pulley.
(e) If there is noticeable wear on the belt teeth, check timing cover for damage and check for correct gasket installation. Check for foreign material
on the pulley teeth.If necessary, replace the timing belt.
2. Inspect idler pulleys.
Check the turning smoothness of the idler pulley. If necessary, replace the idler pulley.
3. Inspect tension spring.
(a) Measure the free length of tension spring.
Free length: 46.1 mm (1.815 in.)
If the free length is not as specified, replace the tension spring.
(b) Measure the tension of the tension spring at the specified installed length.
Installed tension: 6.0 7.0 kg (13.2 - 15.4 lb, 59 - 69 N-m) at 50.5 mm (1.988 in.)
If the installed tension is not as specified, replace the tension spring.
