Camry Sedan L4-2.0L (3S-FE) (1987)
13. INSTALL NO.2 TIMING BELT COVER
(a) Install the two gaskets to the No.1 and No.2 belt covers.
(b) Install the belt cover with the five bolts.
14. INSTALL SPARK PLUGS
Torque: 180 kg-cm (13 ft-Ib. 18 Nm)
15. INSTALL ENGINE RH MOUNTING INSULATOR AND BRACKET
(a) Install the bracket with the three bolts. Torque the bolts.
Torque: 530 kg-cm (38 ft-lb, 52 Nm)
(b) Install the mounting insulator with the two nuts through bolt.
Torque:
Bolt 800 kg-cm (58 ft-lb, 78 Nm)
Nut 530 kg-cm (38 ft-lb, 52 Nm)
16. LOWER ENGINE
17. INSTALL ALTERNATOR BRACKET
Torque: 425 kg-cm (31 ft-lb, 42 Nm)
18. INSTALL ALTERNATOR
19. INSTALL DRIVE BELTS
Adjust the drive belts.
Drive belt tension:
Alternator
w/ Air con.
New belt 175 ± 5 Ib
Used belt 130 ± 10 Ib
w/o Air con.
New belt 125 ± 25 Ib
Used belt 95 ± 20 Ib
PS pump
New belt 125 ± 10 Ib
Used belt 80 ± 20 Ib
20. INSTALL CRUISE CONTROL ACTUATOR