Camry Sedan L4-20L (3S-FE) (1987) Evaporator Case Removal and Installation
/Page-911001.png)
Evaporator Case: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. Remove lower and upper unit cases.
a. Disconnect connectors.
b. Remove wire harness.
c. Remove four clips.
d. Remove five screws.
e. Remove A/C cut amplifier
f.
Remove upper unit case.
g. Remove thermistor with thermistor holder.
h. Remove lower unit case.
2. Remove expansion valve.
a. Disconnect the liquid tube from the inlet fitting of the expansion valve.
b. Remove the packing and heat sensing tube from suction tube of evaporator.
c. Remove expansion valve.
