Camry Sedan L4-2.4L (2AZ-FE) (2003)
3. REMOVE TRANSVERSE ENGINE MOUNTING INSULATOR (A/T TRANSAXLE)
a. Remove the 3 nuts and transverse engine mounting insulator.
4. REMOVE TRANSVERSE ENGINE MOUNTING INSULATOR (M/T TRANSAXLE)
a. Remove the 3 nuts and transverse engine mounting insulator.
b. Remove the 4 bolts and bracket from the manual transmission.
5. REMOVE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a. Remove the 2 bolts on the front side of the front suspension arm sub-assy lower No. 1 LH.
b. Remove the bolt and nut on the rear side of the front suspension arm sub-assy lower No. 1 LH.
c. Remove the front suspension arm sub-assy lower No. 1 LH.
d. Remove the front lower arm bush stopper from the front suspension arm sub-assy lower No. 1 LH.
6. INSTALL FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a. Install the front lower arm bush stopper to the front suspension arm sub-assy lower No. 1 LH.
b. Install the front suspension arm sub-assy lower No. 1 LH with the 2 bolts to the front side.
Torque: 200 Nm (2,039 kgf-cm, 148 ft. lbs.)