toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Suspension - Front Control Arm Bolt Torque Revision|Page 4778 > < Steering/Suspension - Ball Joint Inspection|Page 4773
Page 1
background image

Control Arm: Technical Service Bulletins
Suspension - Front Control Arm Bolt Torque Revision

SUSPENSION

SU006-03

October 24, 2003

Title:
FRONT SUSPENSION LOWER ARM INSTALLATION TORQUE

Models:
'03 Camry & Avalon

Introduction 

The bolt, nut, and torque specification for the Front Suspension Arm, Sub-Assembly Lower No. 1 (LH and RH) have been changed. When servicing this
area, identify the bolt/nut in use and torque to the appropriate value listed below.

Refer to the illustration for shape and color information of the previous bolt and the new bolt. Carefully note that the previous bolt is green and the new
bolt is red.

The shape of the previous nut and new nut are the same; however, there is a difference in color. Carefully note that the previous nut is green and the new
nut is red.

Applicable Vehicles 
^

2003 model year Camry and Avalon vehicles produced BEFORE the following VINs were built with the previous bolt/nut; vehicles AFTER the
following VINs were built with the new bolt/nut.

Production change Information

Warranty Information

Suspension - Front Control Arm Bolt Torque Revision|Page 4778 > < Steering/Suspension - Ball Joint Inspection|Page 4773