Camry Sedan L4-2.4L (2AZ-FE) (2003)
Parts Information
Components
Installation Procedure
Install Front Suspension Arm Sub-Assembly Lower No. 1 LH Install the front LH lower ball joint assembly to the front suspension arm sub-assembly
lower No. 1 LH with the bolt and nuts.
Torque:
Previous Bolt and Nut (Green):
127 N.m (1,295 kgf.cm, 94 ft.lbf)
HINT:
The thread part of the bolt is green, and no strength mark is on the head.
New Bolt and Nut (Red):
75 N.m (765 kgf.cm, 55 ft.lbf)
HINT:
The thread part of the bolt is red, and strength mark (11T) is on the head.