Camry Sedan L4-2.4L (2AZ-FE) (2003)
5. SEPARATE REAR SUSPENSION ARM ASSY NO.2 LH
a. Remove the bolt, nut and rear suspension arm No. 2 (outer side) from the rear carrier.
HINT: Keep the nut fixed while loosening and removing the bolt.
6. SEPARATE REAR SUSPENSION ARM ASSY NO.2 RH
HINT: Separate the RH side by the procedures with the LH side.
7. SEPARATE REAR SUSPENSION ARM ASSY NO.1 LH
a. Remove the bolt, nut and rear suspension arm No. 1 (outer side) from rear axle carrier.
HINT: Keep the nut fixed while loosening and removing the bolt.
8. SEPARATE REAR SUSPENSION ARM ASSY NO.1 RH
HINT: Separate the RH side by the procedures with the LH side.
9. REMOVE REAR SUSPENSION MEMBER SUB-ASSY
a. Support the rear suspension member with a jack.
b. Remove the 4 nuts, 2 bolts and 4 retainers from the rear suspension member.
10. REMOVE REAR SUSPENSION ARM ASSY NO.1 LH
a. Lower the rear suspension member.