Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
a. Place matchmarks on the ring gear and the case.
b. Using a chisel and hammer, unstake the lock plates.
c. Remove the 8 bolts and 4 lock plates.
d. Using a copper hammer, tap on the ring gear to remove it from the case.
3. REMOVE SIDE BEARING FROM DIFFERENTIAL CASE (RING GEAR SIDE)
Using SST. remove the bearing from ring gear of side of the case.
SST 09950-00020, 09950-00030