Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-258007.png)
13. INSTALL NO.2 TIMING BELT COVER
a. Install the two gaskets to the No.1 and No.2 belt covers.
b. Install the belt cover with the five bolts.
14. INSTALL SPARK PLUGS
Torque: 180 kg-cm (13 ft-lb, 18 N.m)
15. INSTALL ENGINE RH MOUNTING.INSULATOR AND BRACKET
a. Install the bracket with the three bolts. Torque the bolts.
Torque: 530 kg-cm (38 ft-lb, 52 N.m)
2 WD
(2WD) Install the mounting insulator to the mounting bracket and body, and temporarily install the mounting insulator bolt, four nuts and
mounting stay bolt (A). Torque the mounting insulator bolt and four nuts. Do not torque the mounting stay bolt (A) yet.
Torque:
Bolt:
650 kg-cm (47 ft-lb, 64 N.m)
Nut:
To bracket:
530 kg-cm (38 ft-lb, 52 N.m)
To body:
900 kg-cm (65 ft-lb, 88 N.m)
4 WD
(4WD) Install the mounting insulator with the through bolt and two nuts. Torque the through bolt and nuts.
Torque:
Through bolt:
890 kg-cm (64 ft-lb, 87 N.m)
Nut:
530 kg-cm (38 ft-lb, 52 N.m)