Camry Wagon L4-2.0L (3S-FE) (1990)
16. LOWER ENGINE
17. INSTALL ENGINE RH MOUNTING STAY
2 WD
(2WD) Install the mounting stay with the three bolts. Torque the bolts.
Torque: 740 kg-cm (54 ft-lb, 73 N.m)
4 WD
(4WD) Install the mounting stay and ground strap with the bolt and nut. Torque the bolt and nut.
Torque: 740 kg-cm (54 ft-lb, 73 N.m)
18. INSTALL ALTERNATOR BRACKET
Torque: 425 kg-cm (31 ft-lb, 42 N.m)
19. INSTALL ALTERNATOR
20. INSTALL DRIVE BELTS
Adjust the drive belts.
Drive Belt Tension:
Alternator
w/A/C
New belt
175 ± 5 lb
Used belt
130 ± 10 lb
w/o A/C
New belt
125 ± 25 lb
Used belt
95 ± 20 lb
P/S Pump
New belt
125 ± 10 lb
Used belt
80 ± 20 lb
21. INSTALL CRUISE CONTROL ACTUATOR
22. INSTALL ENGINE RH UNDER COVER
23. INSTALL RH FRONT WHEEL
24. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY