Camry Wagon L4-2.0L (3S-FE) (1990)
(b) Using a socket wrench and hammer, drive in a new oil seal.
ASSEMBLY OF POWER STEERING PUMP
1. COAT ALL SLIDING SURFACES WITH POWER
STEERING FLUID BEFORE ASSEMBLY
2. INSTALL FRONT PLATE AND ROTOR TO PUMP SHAFT
(a) Using a plastic hammer, drive the short straight pin to the front plate.
(b) Install two new 0-rings to the front plate.
(c) Install the front plate to the pump shaft.
(d) Install the rotor to the pump shaft.
(e) Install the snap ring.