Camry Wagon L4-2.0L (3S-FE) (1990)
![background image](/toyota/camry_wagon/l4-2.0l_(3s-fe)/Page-812003.png)
SST 09350-32014 (09351-32070)
b. Remove the snap rin9 with the snap ring pliers.
c. Remove the spring retainer and eighteen return springs.
5. REMOVE CLUTCH PISTON
a. Apply compressed air into the oil passage to remove the piston.
If the piston does not come out, use needle-nose pliers to remove it
b. Remove the two O-rings from the piston.
6. IF NECESSARY, REMOVE OIL SEAL RINGS
Remove the two oil seal rings from the shaft.