Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-889005.png)
REMOVAL OF FRONT DRIVE SHAFT
1. REMOVE COTTER PIN, LOCK NUT CUP AND LOCK NUT
(a) Remove the cotter pin and lock nut cap.
(b) Loosen the bearing lock nut while depressing the brake pedal.
2. REMOVE ENGINE UNDER COVER
3. REMOVE FRONT FENDER APRON SEAL
4. DRAIN OUT GEAR OIL FLUID
5. DISCONNECT TIE ROD END FROM STEERING KNUCKLE
(a) Remove the cotter pin and nut from the steering knuckle.
