Camry Wagon L4-2.0L (3S-FE) (1990)
![background image](/toyota/camry_wagon/l4-2.0l_(3s-fe)/Page-889011.png)
10. REMOVE INBOARD JOINT DUST COVER
11. REMOVE DUST COVER
Using SST, press out the dust cover.
SST 09950-00020
12. REMOVE BEARING
(a) Using snap ring pliers, remove the snap ring.
(b) Using a press, remove the bearing from the inboard joint.
(c) Remove the snap ring.
Front Drive Shaft Assembly
ASSEMBLY OF FRONT DRIVE SHAFT