Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-973003.png)
a. Place the matchmarks on the differential right and left case.
b. Using a torx wrench, remove the sixteen torx screws.
Torx wrench: T50 09042-00040
c. Using a plastic hammer, tap out the differential left case.
d. Remove the speedometer drive gear from the differential right case.
e. Remove the two differential side gears, two side gear thrust washers, differential pinions and four pinion washers from the differential left case.
4. (TRANSMISSION CASE SIDE)
IF NECESSARY, REPLACE OIL SEAL AND TAPER ROLLER BEARING OUTER RACE