Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
a. Using screwdriver, remove the oil seal.
b. Remove the transmission oil baffle.
c. Using a brass bar and hammer, drive out the bearing outer race lightly and evenly.
d. Remove the shim.
e. Install the shim.
HINT: First select and install a shim of lesser thickness than before.
f.
Using SST and a press, install the taper roller bearing outer race.
SST 09316-60010 (09316-00010, 09316-00040)