Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-973005.png)
g. Install the transmission oil baffle.
HINT: Install the transmission oil baffle projection into the case side cutout.
h. Using SST and a hammer, drive in a new oil seal.
SST 09223-15010
i.
Coat the lip of oil seal with MP grease.
5. (TRANSAXLE CASE SIDE)
IF NECESSARY, REPLACE OIL SEAL AND TAPER ROLLER BEARING OUTER RACE
a. Remove the four bolts and three nuts.
b. Using a plastic hammer, tap the stud bolt and remove the transaxle case cover.