Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
c. Using a screwdriver and hammer, drive out the oil seal.
d. Using a SST, brass bar and hammer, remove the taper roller bearing outer race.
SST 09612-65014
e. Using SST and a press, install the taper roller bearing.
SST 09316-60010 (09316-00010, 09316-00040)
f.
Using SST and a hammer, drive in a new oil seal.
SST 09316-60010 (09316-00010)
g. Coat the lip of oil seal with MP grease.