Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-973011.png)
Install the differential case assembly to the transaxle case.
6. INSTALL OUTPUT SHAFT ASSEMBLY
Lift up the differential case, install the output shaft assembly.
7. INSTALL TRANSMISSION CASE
a. Install the transmission case.
HINT: If necessary, tap on the case with a plastic hammer.
b. Install and torque the seventeen bolts.
Torque: 29 N.m (300 kgf-cm 22 ft-lbf)
8. INSTALL OUTPUT SHAFT REAR TAPER ROLLER BEARING OUTER RACE
Using a plastic hammer, drive in the outer race.