Celica L4-1.8L (2ZZ-GE) (2005)
/Page-307015.png)
(h) Connect the No.3 ventilation hose to the No.1 ventilation pipe.
(i) Install the ignition coil (See page 10-7).
22. INSTALL RH ENGINE MOUNTING INSULATOR
(a) 1ZZ-FE: Install the RH engine mounting insulator with the 4 bolts and 2 nuts.
Torque: 52 Nm (530 kgf-cm, 38 ft-lbf)
(b) 2ZZ-GE: Install the RH engine mounting insulator with the 5 bolts and 2 nuts.
Torque: 52 Nm (530 kgf-cm, 38 ft-lbf)
23. INSTALL PS PUMP
(a) Install the PS pump with the 2 through bolts and nuts.
Torque: 36 Nm (370 kgf-cm, 27 ft-lbf)
(b) Install the PS pump pulley with the pulley nut.
(c) Connect the PS oil pressure switch connector.
24. INSTALL GENERATOR AND DRIVE BELT
25. 2ZZ-GE: INSTALL AIR SWITCHING VALVE
26. INSTALL RH ENGINE UNDER COVER
27. INSTALL RH FRONT WHEEL
28. FILL WITH ENGINE COOLANT
29. INSTALL FRONT FENDER APRON SEAL AND UPPER RADIATOR SUPPORT SEAL
30. START ENGINE AND CHECK FOR COOLANT LEAKS