Celica L4-1.8L (2ZZ-GE) (2005)
4. IF NECESSARY, REPLACE BEARING
a. Using a punch and a hammer, tap out the bearing.
b. Coat a new bearing molybdenum disulfide lithium base grease.
c. Using a brass bar and a hammer, tap in the bearing.
5. IF NECESSARY, REPLACE 2 UNION SEATS
a. Using a screw extractor, remove the union seat from the rack housing.
b. Using a hammer and an extension bar, lightly tap in a new union seat.
NOTICE: Before installing the union seat, remove the dust sticking to the rack housing.
c. Employ the same manner described above to the other side.
6. IF NECESSARY, REPLACE TEFLON RING AND O-RING