Celica L4-1998cc 2.0L DOHC (3S-GE) (1986)
/Page-198003.png)
b. Check that the alignment marks of the camshaft timing pulleys and No.3 timing belt cover are aligned.
Timing Belt Removal
16. Remove timing belt from camshaft timing pulleys
NOTE: If reusing the timing belt, place matchmarks on the camshaft timing pulleys and belt.
Timing Belt Removal
a. Loosen the No.1 idler pulley bolt and shift it left as far as it will go.
b. Temporarily tighten the mount bolt and then relieve the timing belt tension.
c. Remove the belt from the camshaft timing pulley.
NOTE:
-
Support the belt so the meshing of the crankshaft timing pulley and timing belt does not shift.
-
Be careful not to drop anything inside the timing belt cover.
-
Do not allow the belt to come into contact with oil, water and dust.
Timing Belt Removal
17. Remove the camshaft timing pulleys.
a. Hold the camshaft with the wrench, and remove the pulley mount bolts.
b. Remove the camshaft pulleys and pins.
NOTE: Arrange the intake and exhaust pulleys.
