Corolla L4-1.8L (1ZZ-FE) (2004)
/Page-621003.png)
5. DISCONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Remove the cable end from the rod of the floor shift assembly.
b. Using a screw driver, disconnect the control cable from the shift lever plate.
6. DISCONNECT FLOOR SHIFT PARKING LOCK CABLE ASSY
a. Remove the cable end from the lever pin of the floor shift assembly.
b. Using a screw driver, disconnect the parking lock cable from the floor shift assembly.
7. REMOVE FLOOR SHIFT ASSY
a. Disconnect the 2 connector.
b. Disconnect the 2 wire harness clamps from the shift lever assy.
c. Remove the 4 bolts and floor shift assy.