Corolla L4-1.8L (1ZZ-FE) (2004)
8. REMOVE FLOOR SHIFT SHIFT LEVER KNOB SUB-ASSY
a. Releasing the lock by pressing the slick, disconnect the indicator lamp wire connector from the shift lever plate.
b. Disengage the secondary locking device.
c. Using a small screwdriver, disengage the locking lug of the terminals 2 and 4, and pull the terminals out from the rear.
d. Disconnect the wire harness from the clamps.
e. Remove the 2 screws and shift lever knob sub-assembly.
NOTICE: Pay attention not to apply unnatural load to transmission control switch wire harness.
9. REMOVE FLOOR SHIFT SHIFT LEVER KNOB COVER
a. Remove the shift lever knob cover.