Corolla L4-1.8L (2ZZ-GE) (2005)
Wheel Speed Sensor: Service and Repair
Speed Sensor, Front
SPEED SENSOR FRONT LH
REPLACEMENT
HINT: Use the same procedures for the RH side and LH side. The procedures listed below are for the LH side.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER LINER LH
3. REMOVE SPEED SENSOR FRONT LH
a. Disengage the clamp and disconnect the connector.
b. Remove the 2 bolts and separate the speed sensor front from the body and shock absorber.
c. Remove the bolt and speed sensor front LH.
NOTICE: Prevent foreign matter from attaching to the sensor tip.
4. INSTALL SPEED SENSOR FRONT LH
a. Install the speed sensor front LH with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)