Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-814002.png)
NOTICE: Prevent foreign matter from attaching to the sensor tip.
b. Install the speed sensor front with the 2 bolts.
Torque:
Bolt A: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Bolt B: 29 Nm (296 kgf-cm, 21 ft. lbs.)
c. Connect the connector and engage the clamp.
5. INSTALL FRONT FENDER LINER LH
6. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
7. CHECK ABS SPEED SENSOR SIGNAL
