Corolla L4-1.8L (2ZZ-GE) (2005)
a. Remove the 3 bolts and nut, then remove the cylinder head cover No.2.
7. REMOVE WIRE HARNESS PROTECTOR
8. SEPARATE SUCTION HOSE SUB-ASSEMBLY
9. REMOVE AIR SWITCHING VALVE ASSEMBLY
10. REMOVE FAN AND GENERATOR V BELT
11. REMOVE GENERATOR BRACKET NO.1
12. REMOVE GENERATOR ASSEMBLY
13. REMOVE COMPRESSOR AND MAGNETIC CLUTCH (W/ AIR CONDITIONING)
HINT: Hang up the hoses instead of detaching.
14. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
15. REMOVE CONSOLE PANEL UPPER
16. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
17. REMOVE CONSOLE BOX CARPET
18. REMOVE CONSOLE BOX SUB-ASSEMBLY REAR
19. REMOVE EXHAUST PIPE ASSEMBLY FRONT
20. REMOVE ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH
21. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
HINT: Jack the engine up and down to remove the bolt.
22. REMOVE IGNITION COIL ASSEMBLY
23. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY
24. REMOVE MANIFOLD STAY
a. Remove the 2 bolts and nut, then remove the manifold stay.
25. REMOVE EXHAUST MANIFOLD HEAT INSULATOR NO.1
26. REMOVE EXHAUST MANIFOLD
a. Remove the 4 bolts and 2 nuts, then remove the exhaust manifold and gasket.
27. REMOVE WATER PUMP PULLEY
SST 09960-10010 (09962-01000, 09963-00600)
28. REMOVE WATER PUMP ASSEMBLY